Laminating Machine Working Principle
Introduction:
This laminating machine is used of 304 stainless steel frame, the conveyor belt be design with food-grade rope, the power transmission for the chain drive and all the power chain to install tension device, all tensioners are used by bearing drive, rope pulley material for the PE or MPPO material. All this design is avoid to broken the wafer biscuits.
Working Principle:
This equipment is easy to operate which with foods grade conveyor belt, it can pick the wafer biscuits after the wafer biscuit from the oven baking machine. The laminating machine can send the wafer biscuits from cream spreading machine to the cooling cabinet. Whole machine is in stainless steel execution .The conveyor belts adopts the food grade belt ,this machine is driven by chain drive with chain tensioning device ,all tighteners are driven by bearings .there are holders tapes under the belt to avoid breaking the wafer.
Operation Instruction:
a. Starting: This machine is synchrocomtrol with laminator transportation system, only need to connect the general supply and turn the changeover switch to automatic.
b. Working: Press the emergency stop button and turn the changeovers swatch to “manual" when failure.
c. Remove the failure, then turn the changeover switch to “Automatic” and reset the machine.
So there are some knowledge about laminating machine, also more details about this machine, please contact us more professional workers.
